Description
The VND810SP -E is a monolithic device made by using STMicroelectronics VIPower M0-3 technology, intended for driving any kind of load with one side September 2013. Doc ID 7377 Rev 5. 1/27. 1. VND810SP . Double channel high- side driver. Features. Very low standby current. CMOS compatible input.
Part Number | VND810SP |
Main Category | Integrated Circuits (ICs) |
Sub Category | PMIC - Power Distribution Switches, Load Drivers |
Brand | TDK |
Description | IC DRIVER 2CH HI-SIDE POWERSO-10 |
Series | VIPower |
Packaging | General Purpose |
Switch Type | Tube |
Number of Outputs | 2 |
Ratio - Input:Output | 1:1 |
Output Configuration | High Side |
Output Type | N-Channel |
Interface | On/Off |
Voltage - Load | 5.5 V ~ 36 V |
Voltage - Supply (Vcc/Vdd) | Not Required |
Current - Output (Max) | 3.5A |
Rds On (Typ) | 160 mOhm (Max) |
Input Type | Non-Inverting |
Features | Auto Restart, Status Flag |
Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Operating Temperature | -40°C ~ 150°C (TJ) |
Package / Case | PowerSO-10 Exposed Bottom Pad |
Supplier Device Package | 10-PowerSO |
Image |
VND810SP
TDK-EPCOS
16000
1.82
Finestock Electronics HK Limited
VND810SP
TDK Electronics
3190
2.89
HK HEQING ELECTRONICS LIMITED
VND810SP
TDK/EPCOS
1202
3.96
Gallop Great Holdings (Hong Kong) Limited
VND810SP
TDK Epcos
20000
5.03
HK XINYI COMPONENTS ASIA CO., LIMITED
VND810SP
TDK-EPC
11600
6.1
CIS Ltd (CHECK IC SOLUTION LIMITED)